Home & DIY

Roof Cost Calculator

Roof area = footprint × pitch factor, where pitch factor = √(1 + (rise ÷ 12)²). A 1,500 sq ft footprint with a 6/12 pitch has about 1,677 sq ft of roof, or 16.8 squares. With 10% waste that is 18.45 squares; at an example price of $500 per square the job is about $9,224.

Roof footprint
sq ft
ft
ft
%
$per 100 sq ft

Example price only. Use the figure from your contractor’s quote.

$
$

Estimated roof cost

—

—

Roof surface area
—
Pitch factor
—
Roofing squares (no waste)
—
Squares to price (with waste)
—
Roofing cost
—
Tear-off cost
—

—

How to use the roof cost calculator

  1. Enter the roof footprint: the area of the house as seen from above, including the overhangs (eaves). Either type it in, or enter the length and width.
  2. Choose the roof pitch, the inches of rise for every 12 inches of horizontal run.
  3. Enter a waste allowance for cutting at edges, hips and valleys.
  4. Enter the price per square from a roofing quote, plus any separate tear-off cost per square and other one-off costs.

The calculator converts the footprint into true roof surface area, then into roofing squares, and prices the job. It is a planning tool for comparing quotes and budgeting, not a substitute for a roofer measuring your roof.

Roof area and pitch

A sloped roof covers more surface than the floor area beneath it. To account for the slope, multiply the footprint by a pitch factor:

pitch factor = √(1 + (rise ÷ 12)²) roof area = footprint × pitch factor squares = roof area ÷ 100

PitchPitch factorExtra area vs footprint
3/121.031about 3%
4/121.054about 5%
6/121.118about 12%
8/121.202about 20%
10/121.302about 30%
12/121.414about 41%

The factor works for simple gable and hip roofs where all slopes share the same pitch. For roofs with several pitches, calculate each section separately and add them.

Worked example

Footprint 1,500 sq ft including overhangs (for example 50 × 30 ft), 6/12 pitch, 10% waste, example price $500 per square.

  1. Pitch factor: √(1 + 0.5²) = √1.25 ≈ 1.118
  2. Roof area: 1,500 × 1.118 ≈ 1,677 sq ft = 16.77 squares
  3. With 10% waste: 16.77 × 1.10 ≈ 18.45 squares
  4. Cost: 18.45 × $500 ≈ $9,224

The $500 per square is only an example to show the math. Use the price from your own quotes.

How to find your pitch

  • From the attic: hold a level horizontally against a rafter, measure 12 inches along the level, and measure straight up to the underside of the rafter. That number is the rise.
  • From plans: building plans usually show the pitch as a small triangle with “12” on one side and the rise on the other.
  • Ask a roofer: pitch also affects which materials can be used and whether extra safety equipment is needed, so a contractor will check it anyway.

Never climb onto a roof to measure without proper safety equipment.

What a roofing quote usually covers

Price per square often includes materials and installation, but quotes are put together differently, so check what is included:

  • Removal and disposal of old roofing (tear-off), or a second layer installed over the old one where allowed.
  • Underlayment, flashing, drip edge, ridge caps and ventilation.
  • Replacing damaged decking, which is often priced per sheet only once the old roof is off.
  • Permits, inspections and cleanup.

Get several written quotes, compare them on the same number of squares, and use the calculator to see whether each contractor’s measurements look reasonable.

Paying for a new roof

A roof is one of the larger home repairs. If you plan to finance it, compare a fixed home improvement loan with drawing on a home equity line of credit, and look at total interest, not just the monthly payment. For other surfaces around the house, the square footage calculator works out floor, wall and countertop areas.

Frequently asked questions

How do I estimate the cost of a new roof?

Work out the roof area, convert it to squares (1 square = 100 sq ft), add a waste allowance, and multiply by the price per square from your contractor’s quote. Add any separate costs, such as tearing off the old roof, permits or repairs to the decking.

What is a roofing square?

Roofers measure in squares, where one square is 100 square feet of roof surface. A 1,677 sq ft roof is about 16.8 squares.

How does roof pitch affect the area?

A steeper roof has more surface over the same footprint. Multiply the footprint by the pitch factor √(1 + (rise ÷ 12)²). A 4/12 roof adds about 5%, a 6/12 roof about 12%, and a 12/12 roof about 41%.

How much waste should I allow?

It depends on the roof. Simple gable roofs need less extra material than roofs with hips, valleys, dormers and other cuts. Ask your contractor or supplier what allowance they use for your roof and enter it here.

Why don’t you show average roofing prices?

Roofing prices vary widely by material, region, roof complexity and season, and they change over time. A national average can be far from your actual quote, so the calculator uses the price per square you enter from real local quotes.